|
|
|
 Download PDF Reader |
|
|
|
|
| Contact WMEC |
Address:
No.205-2 Xingqian Road Jimei, Xiamen
Fujian, China
Tel:+86-592-6771888 Fax:+86-592-6770888
E-mail: sales@wanming.com |
|
| |
|
|
|
|
| Home > Company > Quality Assurance |
|
| |
 |
Quality Policy:
- Let customer satisfaction.
- Ensure process quality.
- Everyone participate actively in quality management.
|
| |
|
| |
Key Quality Milestone
2000 |
Award ISO9001:2000 and IECQ |
2001 |
Safety Standard Recognized Ceramic Disc Capacitors(HM,HJ) series products by UL,NEMKO,SEV,DEMKO. |
| Zinc Oxide Varistors(WMR) series products by UL,VDE,CSA. |
2002 |
Safety Standard Recognized Ceramic Disc Capacitors(HM,HJ) series products by VDE,SEMKO,FIMKO,CSA. |
2003 |
Safety Standard Recognized Ceramic Disc Capacitors(HM,HJ) series products by CQC. |
|
|
| |
|
| |
Quality Assurance Dept.Organization
Our QA Dept.is composed of below two sections to execute:
1.Quality Control System
2.Quality Assurance System |
| |
|
| |
| A. IQC |
Incoming Quality Control ensures only qualified materials are used in the production process and a steady supplying is received on time from partner suppliers. All incoming materials must pass rigorous inspection using state of the testing equipment and highly trained inspectors.
|
|
| B. PQC |
In process quality control is proceeding for full engineering requirement. This will make sure that our products are all under fully controlled condition.
|
|
| C. FQC |
Final Quality Control was sample inspection before per lot production into warehouse.AQL(MAJ):0.25;AQL(MIN):0.4
|
|
| D. OQC |
| Outgoing Quality Contorl is performed by experienced inspector to supply our customer the totally satisfaction products.Also we support with customer's specialties demands. |
| |
|
|
|
| |
|
| |
Ateam of highly experienced engineers establishes and maintains ISO9001:2000 quality systems,which serve as the backbone for continuous improvement.
- In the production process,we use SPC to control our product quality.
- We founded an reliable testing laboratory.Our products are tested with reliable standard by plan.
- Our inspection meter must be calibrated with calibration standard every year.
- We use PDCA,FMEA,and QC tool to ensure CPK=1.33 and PPM level management.
|
|
| |
|
|
| |
| Our Certificates: |
| |
CQC
Product Certificate |
CQC
Product Certificate |
Certificate of
Compliance |
Demko Certificate |
 |
Appendix to Demko Certificate No. 3131030-01 |
Certificate SEV |
Certificate SEV |
Underwriters Laboratories Inc. |
|
VDE |
VDE |
ISO14001 |
ISO9001 |
|
|
| |
|
繁体版 
